Innovative DisplayWorks IDW G-26CSI Glass Door Merchandiser Cooler
No videos available for this machine yet.
| Weight | 319 lbs |
|---|---|
| Dimensions | D 30.375" x W 30.77" x H 78.375" |
| Manufacturer | Innovative DisplayWorks IDW |
| Shelves | 4 |
| Net Cu Ft | 23 |
| HP | 1/3 |
For further details on condition, please see our Machine Condition Details.
- Cosmetic condition: 9-10
- Paint and bodywork (when applicable)
- Detail cleaned
- Thoroughly tested and working
- Serviced money systems
B – Good
- Cosmetic condition: 6-8
- Normal visible wear and tear, minor scratches, nicks, dents, scuffs, dings, various cosmetic imperfections, etc.
- Wiped down, not detail cleaned
- Thoroughly tested and working
- Serviced money systems
C – Fair
- Cosmetic condition: 3-5
- Blemishes that exceed normal wear and tear, scratches, nicks, dents, scuffs, dings, rust, various cosmetic imperfections, etc.
- Wiped down, not detail cleaned
- Thoroughly tested and working
- Serviced money systems
F – Bad
- Cosmetic condition: 1-2
- Severe blemishes i.e. rust, large dents, severe scratches, major cracks or see-through graphic, etc.
- Not cleaned at all, left “as-is” cosmetically but, mechanically functional
- Thoroughly tested primary purposes functioning, secondary functions may not work optimally, i.e. lights, hinges…
- Serviced money systems
ONE YEAR PARTS & LABOR WARRANTY
IDW warrants to the original purchaser of every new IDW refrigerated unit, the cabinet and all parts thereof, to be free from defects in material or workmanship, under normal and
proper use and maintenance service as specified by IDW and upon proper installation and start-up in accordance with the instruction packet supplied with each IDW unit. IDW’s
obligation under this warranty is limited to a period of one (1) year from the date of original installation or 15 months after shipment date from IDW, whichever occurs first.
Any part covered under this warranty that are determined by IDW to have been defective within one (1) year of original installation or fifteen (15) months after shipment date from IDW
warehouse, whichever occurs first, is limited to the repair or replacement, including labor charges, of defective parts or assemblies. The labor warranty shall include standard straight
time labor charges only and reasonable travel time, as determined by IDW.
ADDITIONAL FOUR-YEAR COMPRESSOR WARRANTY
In addition to the one (1) year warranty stated above, IDW warrants its hermetically and semi-hermetically sealed compressor to be free from defects in both material and workmanship under normal and proper use and maintenance service for a period of five (5) years from the date of original installation but not to exceed five (5) years and three (3) months after shipment
from IDW warehouse. Compressors determined by IDW to have been defective within this extended time period will, at IDW’s option, be either repaired or replaced with a compressor
or compressor parts of similar design and capacity. The four (4) year extended compressor warranty applies only to hermitically and semi-hermitically sealed parts of the compressor and does not apply to any other parts or components, including, but not limited to, cabinet, paint finish, temperature control, refrigerant, metering device, driers, motor starting equipment, fan assembly or any other electrical component, etcetera. This warranty does not apply to damage or defect caused by misuse, mishandling, neglect, accident, improper installation or modification by anyone other than IDW.
R290 OR R600a COMPRESSOR WARRANTY
The four-year compressor warranty detailed above will be voided if the following procedure is not carefully adhered to:
1. This system contains R290 or R600a refrigerant and polyester lubricant. The polyester lubricant has rapid moisture absorbing qualities. If long exposure to the ambient
conditions occur, the lubricant must be removed and replaced with new. For oil amounts and specifications please call IDW technical service department (877-307-2665). Failure to
comply with recommended lubricant specification will void the compressor warranty.
2. Drier replacement is very important and must be changed when a system is opened for servicing. A drier using XH-7 desiccant or an exact replacement solid core drier must be
used. The new drier must also be the same capacity as the drier being replaced.
3. Micron level vacuums must be achieved to insure low moisture levels in the system. 500 microns or lower must be obtained.
4. Condenser Maintenance: It is essential to properly maintain the refrigeration system. Failure to clean the condenser at regular intervals may cause failure of the refrigeration
system and will void the warranty.
WARRANTY CLAIMS
All claims for labor or parts must be made directly through IDW. All claims should include: model number of the unit, the serial number of the cabinet, proof of purchase, date of
installation, and all pertinent information supporting the existence of the alleged defect. In case of warranty compressor, the compressor model tag must be returned to IDW along with
above listed information. Any action or breach of these warranty provisions must be commenced within one (1) year after that cause of action has occurred.
WHAT IS NOT COVERED BY THIS WARRANTY
IDW’s sole obligation under this warranty is limited to either repair or replacement of parts, subject to the additional limitations below. This warranty neither assumes nor authorizes any
person to assume obligations other than those expressly covered by this warranty.
NO CONSEQUENTIAL DAMAGES. IDW IS NOT RESPONSIBLE FOR ECONOMIC LOSS; PROFIT LOSS; OR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, INCLUDING
WITHOUT LIMITATION, LOSSES OR DAMAGES ARISING FROM FOOD OR PRODUCT SPOILAGE CLAIMS WHETHER OR NOT ON ACCOUNT OF REFRIGERATION FAILURE.
WARRANTY IS NOT TRANSFERABLE. This warranty is not assignable and applies only in favor of the original purchaser/user to whom delivered. ANY SUCH ASSIGNMENT OR
TRANSFER SHALL VOID THE WARRANTIES HEREIN MADE AND SHALL VOID ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE.
IMPROPER USAGE. IDW ASSUMES NO LIABILITY FOR PARTS OR LABOR COVERAGE FROM COMPONENT FAILURE OR OTHER DAMAGES RESULTING FROM IMPROPER USAGE OR INSTALLATION OR FAILURE TO CLEAN AND/OR MAINTAIN PRODUCT AS SET FORTH IN THE WARRANTY PACKET PROVIDED WITH THE UNIT.
ALTERATION, NEGLECT, ABUSE, MISUSE, ACCIDENT, DAMAGE DURING TRANSIT OR INSTALLATION, FIRE, FLOOD, ACTS OF GOD. IDW is not responsible for the repair or replacement of any parts that IDW determines have been subjected, after the date of shipment, to alteration, neglect, abuse, misuse, accident, damage during transit or installation,
fire, flood, or act of God.
IMPROPER ELECTRICAL CONNECTIONS. IDW IS NOT RESPONSIBLE FOR THE REPAIR OR REPLACEMENT OF FAILED OR DAMAGED COMPONENTS REULTING FROM ELECTRICAL POWER FAILURE, THE USE OF EXTENSION CORDS, LOW VOLTAGE, OR VOLTAGE DROPS TO THE UNIT.
NO IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE: THERE ARE NO OTHER WARRANTIES, EXPRESSED, IMPLIED OR STATUTORY, EXCEPT THE ONE (1) YEAR PARTS & LABOR WARRANTY AND THE ADDITIONAL FOUR (4) YEAR COMPRESSOR WARRANTY AS DESCRIBED ABOVE. THESE WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, INCLUDING IMPLIED WARRANTY
AND MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. WE
RESERVE THE RIGHT TO AMEND THESE TERMS AND CONDITIONS AT OUR DISCRETION.
OUTSIDE U.S.: This warranty does not apply to, and IDW is not responsible for, any warranty claims made on products sold or used outside the United States and Canada.
REMOTE CONDENSERS: IDW warrants the original purchaser of the remote cabinet one-year parts and labor coverage for all cabinet parts thereof to be free from defects in material or workmanship, under normal and proper use and maintenance service, as specified by IDW. This warranty is limited to the cabinet only. IDW assumes no liability for remote condensing units.
At Vending Concepts, we want our customers to understand our return and refund process before making a purchase. Please review the following policy carefully before requesting a return.
1. Items Eligible for Return
Special orders and custom orders are non-returnable and non-cancelable. This includes, but is not limited to, new machines, custom graphics, and other specially ordered or customized products.
All other items may be eligible for return, subject to the conditions, deadlines, and fees outlined in this policy.
2. Return Request Deadlines
All return requests must be approved by Vending Concepts through a Return Merchandise Authorization (RMA).
- An RMA must be requested within 7 days of receiving the merchandise or 60 days from the original purchase date, whichever comes first.
- No returns will be accepted after 7 days from the date the merchandise is received.
- An RMA is required for all approved returns. Items returned without an RMA may not be accepted.
To request an RMA, please contact our Customer Service team during regular business hours, Monday through Friday, 8:00 AM–5:00 PM CST.
3. Restocking Fees and Return Shipping Costs
Approved returns are subject to a 25% restocking fee, along with all applicable shipping charges.
The buyer is responsible for the following costs:
- Restocking fee: A 25% charge on the returned item.
- Original shipping costs: The full cost of shipping the machine from Vending Concepts to the buyer, even if the original purchase included free shipping.
- Return shipping costs: The full cost of shipping the machine back to Vending Concepts.
- Additional restoration or repair costs: Any costs necessary to return the machine to its original shipped condition, subject to the limitations described in Section 5.
Important Information About Free Shipping
Although shipping may be advertised as free to the buyer, Vending Concepts still incurs the full cost of shipping the machine. If a buyer returns a machine, the buyer becomes responsible for the original shipping cost.
Vending Concepts will provide an invoice from the trucking company documenting the original shipping charges. These charges remain the buyer’s responsibility, even when shipping was initially provided at no cost to the buyer.
4. Packaging and Return Shipping Requirements
The buyer is responsible for arranging and paying for all return shipping.
The buyer may choose to:
- Arrange return shipping independently; or
- Ask Vending Concepts to assist in obtaining the best available shipping quote.
Before shipping the machine back, the buyer must properly secure it to a pallet and wrap it appropriately to help prevent damage during transit.
The buyer is responsible for ensuring the machine is packaged and secured for safe transportation back to Vending Concepts.
5. Condition of Returned Merchandise
Returned machines must be received by Vending Concepts in the same condition they were in when originally shipped to the buyer.
If a machine is returned in a different condition, the buyer will be responsible for any additional costs necessary to restore it to its original shipped condition. These costs will not exceed the original purchase price of the machine.
Any applicable restoration or repair costs will be deducted from the refund.
Ownership of the machine remains with the buyer until Vending Concepts receives the machine in its original shipped condition and issues the applicable refund.
6. Refunds
Once the returned machine has been received and inspected, Vending Concepts will determine the applicable refund amount.
The refund will be calculated by deducting the following from the original machine purchase price:
- The 25% restocking fee.
- The original shipping charges from Vending Concepts to the buyer.
- The return shipping costs, which are the buyer’s responsibility and must be paid separately or as otherwise arranged.
- Any applicable restoration or repair costs resulting from the machine being returned in a condition different from its original shipped condition.
The refund will be issued after the returned machine has been received in the required condition and the applicable deductions have been determined.
7. Contact Customer Service
To request a Return Merchandise Authorization (RMA) or discuss a potential return, please contact Vending Concepts Customer Service during the following hours:
Monday–Friday: 8:00 AM–5:00 PM CST
All returns must be authorized in advance, and requests must be made within the applicable deadlines outlined above.
Thank you for your understanding and for choosing Vending Concepts.
No videos available for this machine yet.
| Weight | 319 lbs |
|---|---|
| Dimensions | D 30.375" x W 30.77" x H 78.375" |
| Manufacturer | Innovative DisplayWorks IDW |
| Shelves | 4 |
| Net Cu Ft | 23 |
| HP | 1/3 |
For further details on condition, please see our Machine Condition Details.
- Cosmetic condition: 9-10
- Paint and bodywork (when applicable)
- Detail cleaned
- Thoroughly tested and working
- Serviced money systems
B – Good
- Cosmetic condition: 6-8
- Normal visible wear and tear, minor scratches, nicks, dents, scuffs, dings, various cosmetic imperfections, etc.
- Wiped down, not detail cleaned
- Thoroughly tested and working
- Serviced money systems
C – Fair
- Cosmetic condition: 3-5
- Blemishes that exceed normal wear and tear, scratches, nicks, dents, scuffs, dings, rust, various cosmetic imperfections, etc.
- Wiped down, not detail cleaned
- Thoroughly tested and working
- Serviced money systems
F – Bad
- Cosmetic condition: 1-2
- Severe blemishes i.e. rust, large dents, severe scratches, major cracks or see-through graphic, etc.
- Not cleaned at all, left “as-is” cosmetically but, mechanically functional
- Thoroughly tested primary purposes functioning, secondary functions may not work optimally, i.e. lights, hinges…
- Serviced money systems
ONE YEAR PARTS & LABOR WARRANTY
IDW warrants to the original purchaser of every new IDW refrigerated unit, the cabinet and all parts thereof, to be free from defects in material or workmanship, under normal and
proper use and maintenance service as specified by IDW and upon proper installation and start-up in accordance with the instruction packet supplied with each IDW unit. IDW’s
obligation under this warranty is limited to a period of one (1) year from the date of original installation or 15 months after shipment date from IDW, whichever occurs first.
Any part covered under this warranty that are determined by IDW to have been defective within one (1) year of original installation or fifteen (15) months after shipment date from IDW
warehouse, whichever occurs first, is limited to the repair or replacement, including labor charges, of defective parts or assemblies. The labor warranty shall include standard straight
time labor charges only and reasonable travel time, as determined by IDW.
ADDITIONAL FOUR-YEAR COMPRESSOR WARRANTY
In addition to the one (1) year warranty stated above, IDW warrants its hermetically and semi-hermetically sealed compressor to be free from defects in both material and workmanship under normal and proper use and maintenance service for a period of five (5) years from the date of original installation but not to exceed five (5) years and three (3) months after shipment
from IDW warehouse. Compressors determined by IDW to have been defective within this extended time period will, at IDW’s option, be either repaired or replaced with a compressor
or compressor parts of similar design and capacity. The four (4) year extended compressor warranty applies only to hermitically and semi-hermitically sealed parts of the compressor and does not apply to any other parts or components, including, but not limited to, cabinet, paint finish, temperature control, refrigerant, metering device, driers, motor starting equipment, fan assembly or any other electrical component, etcetera. This warranty does not apply to damage or defect caused by misuse, mishandling, neglect, accident, improper installation or modification by anyone other than IDW.
R290 OR R600a COMPRESSOR WARRANTY
The four-year compressor warranty detailed above will be voided if the following procedure is not carefully adhered to:
1. This system contains R290 or R600a refrigerant and polyester lubricant. The polyester lubricant has rapid moisture absorbing qualities. If long exposure to the ambient
conditions occur, the lubricant must be removed and replaced with new. For oil amounts and specifications please call IDW technical service department (877-307-2665). Failure to
comply with recommended lubricant specification will void the compressor warranty.
2. Drier replacement is very important and must be changed when a system is opened for servicing. A drier using XH-7 desiccant or an exact replacement solid core drier must be
used. The new drier must also be the same capacity as the drier being replaced.
3. Micron level vacuums must be achieved to insure low moisture levels in the system. 500 microns or lower must be obtained.
4. Condenser Maintenance: It is essential to properly maintain the refrigeration system. Failure to clean the condenser at regular intervals may cause failure of the refrigeration
system and will void the warranty.
WARRANTY CLAIMS
All claims for labor or parts must be made directly through IDW. All claims should include: model number of the unit, the serial number of the cabinet, proof of purchase, date of
installation, and all pertinent information supporting the existence of the alleged defect. In case of warranty compressor, the compressor model tag must be returned to IDW along with
above listed information. Any action or breach of these warranty provisions must be commenced within one (1) year after that cause of action has occurred.
WHAT IS NOT COVERED BY THIS WARRANTY
IDW’s sole obligation under this warranty is limited to either repair or replacement of parts, subject to the additional limitations below. This warranty neither assumes nor authorizes any
person to assume obligations other than those expressly covered by this warranty.
NO CONSEQUENTIAL DAMAGES. IDW IS NOT RESPONSIBLE FOR ECONOMIC LOSS; PROFIT LOSS; OR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, INCLUDING
WITHOUT LIMITATION, LOSSES OR DAMAGES ARISING FROM FOOD OR PRODUCT SPOILAGE CLAIMS WHETHER OR NOT ON ACCOUNT OF REFRIGERATION FAILURE.
WARRANTY IS NOT TRANSFERABLE. This warranty is not assignable and applies only in favor of the original purchaser/user to whom delivered. ANY SUCH ASSIGNMENT OR
TRANSFER SHALL VOID THE WARRANTIES HEREIN MADE AND SHALL VOID ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE.
IMPROPER USAGE. IDW ASSUMES NO LIABILITY FOR PARTS OR LABOR COVERAGE FROM COMPONENT FAILURE OR OTHER DAMAGES RESULTING FROM IMPROPER USAGE OR INSTALLATION OR FAILURE TO CLEAN AND/OR MAINTAIN PRODUCT AS SET FORTH IN THE WARRANTY PACKET PROVIDED WITH THE UNIT.
ALTERATION, NEGLECT, ABUSE, MISUSE, ACCIDENT, DAMAGE DURING TRANSIT OR INSTALLATION, FIRE, FLOOD, ACTS OF GOD. IDW is not responsible for the repair or replacement of any parts that IDW determines have been subjected, after the date of shipment, to alteration, neglect, abuse, misuse, accident, damage during transit or installation,
fire, flood, or act of God.
IMPROPER ELECTRICAL CONNECTIONS. IDW IS NOT RESPONSIBLE FOR THE REPAIR OR REPLACEMENT OF FAILED OR DAMAGED COMPONENTS REULTING FROM ELECTRICAL POWER FAILURE, THE USE OF EXTENSION CORDS, LOW VOLTAGE, OR VOLTAGE DROPS TO THE UNIT.
NO IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE: THERE ARE NO OTHER WARRANTIES, EXPRESSED, IMPLIED OR STATUTORY, EXCEPT THE ONE (1) YEAR PARTS & LABOR WARRANTY AND THE ADDITIONAL FOUR (4) YEAR COMPRESSOR WARRANTY AS DESCRIBED ABOVE. THESE WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, INCLUDING IMPLIED WARRANTY
AND MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. WE
RESERVE THE RIGHT TO AMEND THESE TERMS AND CONDITIONS AT OUR DISCRETION.
OUTSIDE U.S.: This warranty does not apply to, and IDW is not responsible for, any warranty claims made on products sold or used outside the United States and Canada.
REMOTE CONDENSERS: IDW warrants the original purchaser of the remote cabinet one-year parts and labor coverage for all cabinet parts thereof to be free from defects in material or workmanship, under normal and proper use and maintenance service, as specified by IDW. This warranty is limited to the cabinet only. IDW assumes no liability for remote condensing units.
At Vending Concepts, we want our customers to understand our return and refund process before making a purchase. Please review the following policy carefully before requesting a return.
1. Items Eligible for Return
Special orders and custom orders are non-returnable and non-cancelable. This includes, but is not limited to, new machines, custom graphics, and other specially ordered or customized products.
All other items may be eligible for return, subject to the conditions, deadlines, and fees outlined in this policy.
2. Return Request Deadlines
All return requests must be approved by Vending Concepts through a Return Merchandise Authorization (RMA).
- An RMA must be requested within 7 days of receiving the merchandise or 60 days from the original purchase date, whichever comes first.
- No returns will be accepted after 7 days from the date the merchandise is received.
- An RMA is required for all approved returns. Items returned without an RMA may not be accepted.
To request an RMA, please contact our Customer Service team during regular business hours, Monday through Friday, 8:00 AM–5:00 PM CST.
3. Restocking Fees and Return Shipping Costs
Approved returns are subject to a 25% restocking fee, along with all applicable shipping charges.
The buyer is responsible for the following costs:
- Restocking fee: A 25% charge on the returned item.
- Original shipping costs: The full cost of shipping the machine from Vending Concepts to the buyer, even if the original purchase included free shipping.
- Return shipping costs: The full cost of shipping the machine back to Vending Concepts.
- Additional restoration or repair costs: Any costs necessary to return the machine to its original shipped condition, subject to the limitations described in Section 5.
Important Information About Free Shipping
Although shipping may be advertised as free to the buyer, Vending Concepts still incurs the full cost of shipping the machine. If a buyer returns a machine, the buyer becomes responsible for the original shipping cost.
Vending Concepts will provide an invoice from the trucking company documenting the original shipping charges. These charges remain the buyer’s responsibility, even when shipping was initially provided at no cost to the buyer.
4. Packaging and Return Shipping Requirements
The buyer is responsible for arranging and paying for all return shipping.
The buyer may choose to:
- Arrange return shipping independently; or
- Ask Vending Concepts to assist in obtaining the best available shipping quote.
Before shipping the machine back, the buyer must properly secure it to a pallet and wrap it appropriately to help prevent damage during transit.
The buyer is responsible for ensuring the machine is packaged and secured for safe transportation back to Vending Concepts.
5. Condition of Returned Merchandise
Returned machines must be received by Vending Concepts in the same condition they were in when originally shipped to the buyer.
If a machine is returned in a different condition, the buyer will be responsible for any additional costs necessary to restore it to its original shipped condition. These costs will not exceed the original purchase price of the machine.
Any applicable restoration or repair costs will be deducted from the refund.
Ownership of the machine remains with the buyer until Vending Concepts receives the machine in its original shipped condition and issues the applicable refund.
6. Refunds
Once the returned machine has been received and inspected, Vending Concepts will determine the applicable refund amount.
The refund will be calculated by deducting the following from the original machine purchase price:
- The 25% restocking fee.
- The original shipping charges from Vending Concepts to the buyer.
- The return shipping costs, which are the buyer’s responsibility and must be paid separately or as otherwise arranged.
- Any applicable restoration or repair costs resulting from the machine being returned in a condition different from its original shipped condition.
The refund will be issued after the returned machine has been received in the required condition and the applicable deductions have been determined.
7. Contact Customer Service
To request a Return Merchandise Authorization (RMA) or discuss a potential return, please contact Vending Concepts Customer Service during the following hours:
Monday–Friday: 8:00 AM–5:00 PM CST
All returns must be authorized in advance, and requests must be made within the applicable deadlines outlined above.
Thank you for your understanding and for choosing Vending Concepts.
Machines That
Earn Their Floor Space
Fits Where Others Won't
Slim-profile and ADA configurations built for corridors, hallways, and tight installs — perfect added to a bank of equipment.
Configurable Shelving
Reconfigure shelves for chips, bottles, cans, specialty items, or non-traditional products. One machine, infinite setups.
ADA Compliant, Standard
Factory-built for the Americans with Disabilities Act — deploy in hospitals, government buildings, and universities with zero retrofitting cost.
Find the Right Machine
for Your Location
Every environment has different needs. Compare our top sellers.
Innovative DisplayWorks IDW G-26CSI Glass Door Merchandiser Cooler
- Manufacturer Innovative DisplayWorks …
- Shelves 4
- Condition O - Open Box
- Net Cu Ft 23
Refurbished Crane National Vendors 147 Black Snack Vending Machine, 40 Selections, 400 Snacks Capacity
- Manufacturer Crane National
- Capacity 40 selections, approxima…
- Width 5 Wide
- MDB (Cashless) Cash & Coin Only
Refurbished Crane National 168D Snack Vending Machine, 32 Selections, 320 Items Capacity
- Manufacturer Crane National
- Width 4 Wide
- Capacity 32 selections, up to 320…
- MDB (Cashless) Credit Card Reader Compa…
Why Vending Concepts
You May Also Like
Refurbished Crane National Vendors 147 Black Snack Vending Machine, 40 Selections, 400 Snacks Capacity
Refurbished Crane National 168D Snack Vending Machine, 32 Selections, 320 Items Capacity
Refurbished Automatic Products 7600 Black Snack Vending Machine, 45 Selections, 450 Items Capacity
