Dixie Narco E-Series HVV Support

For Models 276E, 501E, 600E

1. Power Requirements and Helpful Suggestions
*DO NOT PLUG THE MACHINE INTO AN EXTENSION CHORD* Additionally, VC strongly recommends ensuring the outlet that the machine is plugged into has its own dedicated breaker switch with a minimum of 20 AMPS & 120 Volts.
*OPTIONAL* We strongly suggest plugging in a surge protector between your machine plug & outlet.
This will protect your machine from any damages that could come from power outages, tripped breakers, or other electrical surges that may occur at any given time at a location.
 
2. Prepping Money Systems
  • Unload products from a selection.
  • Make purchases from the empty selection using only nickels, then only dimes, then only quarters.
  • Do this until there are 2 rolls of coins for each corresponding tube.
 
It's best to perform this action when the machine is not stocked with product yet OR you could make sure one of your selections are not yet loaded with product and simply use this selection only while following the next steps.
 
IF you choose to first load product in your machine before loading your coin acceptor, we suggest leaving one of your highest selections without product to complete the coin stocking process faster.
 
Close your vending machine door and begin by making purchases using Nickels until all nickels have been inserted into the vending machine. Repeat this step for dimes & quarters.
 
To know how many coins you will need to load into your coin acceptor, simply count how many Coin Tubes you have in your coin acceptor - you will need 2 rolls of coins for each coin tube you see.
 
Example 1: 3-Tube Coin Acceptor (1 Quarter Tube, 1 Dime Tube & 1 Nickel) = 2 rolls of Quarters ($20.00), 2 rolls of Dimes ($10.00) & 2 rolls of Nickels ($4.00)... $34.00 total in change.
 
Example 2 (Coin Configuration may vary): 4-Tube Coin Acceptor (2 Quarter Tubes, 1 Dime Tube & 1 Nickel) = 4 rolls of Quarters ($40.00), 2 rolls of Dimes ($10.00) & 2 rolls of Nickels ($4.00)... $54.00 total in change.See page _ in manual for instructions on how to load your drink vending machine.
 

Service Manual

Change Price (Page 8)

  1. Open the machine door and press the service mode button.
  2. Press and hold selection buttons 1 & 2 to scroll through the menu on the display. When you wish to hit enter, press and hold selection button 1. Press enter on Set Price.
  3. When a select button is pressed, the price for that selection will be displayed. If the button is held in, the price will increment or decrement. To change from increment to decrement, release the select button and press it again. 
  4. To set all selections for the same price: set the desired vend price on select #1, then simultaneously press and hold buttons 3 & 4 for 5 seconds the display will show “Single Price Set”, this will change the vend price of all selections, in their respective set either primary or secondary, to the price programmed to button #1.
  5. Close the door when you are finished setting prices.

Load Coins (Page 8)

  1. Open the machine door and press the service mode button.
  2. Press and hold selection buttons 1 & 2 to scroll through the menu on the display. When you wish to hit enter, press and hold selection button 1. Press enter on Cash Settings.
  3. Hit enter again on Fill Coin Mech.
  4. A “0” or other number should appear. This represents the value of coins in your machine. Insert coins through the coin acceptor as though you were a customer.  Fill the machine with 2 rolls of each denomination, which is $20 in quarters, $10 in dimes, and $4 in nickels.
  5. Close the door when you are finished loading the coin mech.